• HTML
  • CSS
  • Linux
  • Perl
  • Windows
  • Hardware
  • OpenSUSE
  • Slackware
  • MySQL
  • Vim
  • JavaScript
  • Network
  • Security
  • Debian
  • PHP
  • MovableType
  • Postfix
  • Lenovo X200S
  • Dovecot
  • BIND
  • Samba
  • Apache
  • MacBook Air
  • SSH
  • Raspberry Pi
  • [Linux] [Slackware] [Network] LinuxでPPPoE接続(ppp,rp-pppoe) - Slackware 12.1

    root@darkstar:/usr/local/src# pppoe-setup
    Welcome to the Roaring Penguin PPPoE client setup. First, I will run
    some checks on your system to make sure the PPPoE client is installed
    properly...

    Looks good! Now, please enter some information:

    USER NAME

    >>> Enter your PPPoE user name (default bxxxnxnx@sympatico.ca): ba017891@ba.il24.net

    INTERFACE

    >>> Enter the Ethernet interface connected to the DSL modem
    For Solaris, this is likely to be something like /dev/hme0.
    For Linux, it will be ethn, where 'n' is a number.
    (default eth1):

    Do you want the link to come up on demand, or stay up continuously?
    If you want it to come up on demand, enter the idle time in seconds
    after which the link should be dropped. If you want the link to
    stay up permanently, enter 'no' (two letters, lower-case.)
    NOTE: Demand-activated links do not interact well with dynamic IP
    addresses. You may have some problems with demand-activated links.
    >>> Enter the demand value (default no):

    DNS

    Please enter the IP address of your ISP's primary DNS server.
    If your ISP claims that 'the server will provide DNS addresses',
    enter 'server' (all lower-case) here.
    If you just press enter, I will assume you know what you are
    doing and not modify your DNS setup.
    >>> Enter the DNS information here: server

    PASSWORD

    >>> Please enter your PPPoE password:
    >>> Please re-enter your PPPoE password:

    FIREWALLING

    Please choose the firewall rules to use. Note that these rules are
    very basic. You are strongly encouraged to use a more sophisticated
    firewall setup; however, these will provide basic security. If you
    are running any servers on your machine, you must choose 'NONE' and
    set up firewalling yourself. Otherwise, the firewall rules will deny
    access to all standard servers like Web, e-mail, ftp, etc. If you
    are using SSH, the rules will block outgoing SSH connections which
    allocate a privileged source port.

    The firewall choices are:
    0 - NONE: This script will not set any firewall rules. You are responsible
    for ensuring the security of your machine. You are STRONGLY
    recommended to use some kind of firewall rules.
    1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
    2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
    for a LAN
    >>> Choose a type of firewall (0-2):

    ** Summary of what you entered **

    Ethernet Interface: eth1
    User name: ba017891@ba.il24.net
    Activate-on-demand: No
    DNS addresses: Supplied by ISP's server
    Firewalling: NONE

    >>> Accept these settings and adjust configuration files (y/n)? y
    Adjusting /etc/ppp/pppoe.conf
    Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
    (But first backing it up to /etc/ppp/pap-secrets-bak)
    (But first backing it up to /etc/ppp/chap-secrets-bak)



    Congratulations, it should be all set up!

    Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring
    it down. Type 'pppoe-status' to see the link status.


    Linux運用テクニックを紹介している書籍